Kamal & Co.

Technical Spec & Quote:
•          LED Weighing Scale Display Board.•          Red High Bright Matrix.•          Digit Size 140 mm•          Cabinet Size : 250 mm (H) X 730 mm (W) X 90 mm (D) Approx.•          Model : FOS10 – 0102•          Maximum 8 Digits•          Outdoor ( You need to Place the Board Under Shade)•          Single Sided•          Communication via RS232 via protocol (As per attached document)•          2 mm Front Lexan Polycarbonate Sheet•          Cabinet made with aluminum extrusions •          Working voltage 230V AC mains.•          Industrial and dust resistant•          Fixing Clamp will be Provided with LED Board
Use the terminal programs like Hyperterminal,TeraTerm,RealTerm or Putty software to send theASCII protocol setting to the board via RS232/RS485/LAN/WiFi communication.In the terminal program set 9600,8,n,1 setting for RS232/RS485

In the terminal program set 9600,8,n,1 setting for RS232/RS485Set your communication port noSet Baud rate as 9600 BaudSet Data as 8 BitSet Parity as noneSet Stop bit as 1 Bit

In the terminal program set IP address,TCP port,service,protocol for LAN/WiFiSet your Host IP addressSet TCP port as 8080Set Service as TelnetSet Protocol as unspec


The RS232 / RS485/LAN should be connected to the board and a terminal program likeHyperterminal,TeraTerm ,putty or RealTerm should be used.The Board uses 9600 8,n,1 Setting.

Start of Packet SOP => [End Of Packet EOP => ][ ID Command Data CRC ]ID (2 chars) is the ID of the board default is 01Command (1 char) is the command character which defines the function.Data (n chars) is the data associated with the command.CRC (2 chars) is the CRC for the data packet. To ignore CRC provide XX.

Red High BrightSingle SidedOutdoorModel No 23Cabinet Size : 410 mm(H) x 1050 mm(W) X 90 mm(D)Totally you can Display Two Lines ( Alpha & Numeric)TOP Line : 12 Characters ( 140 mm Digit High) as Static Mode onlyBottom Line : 12 Characters ( 140 mm Digit High) as Static Mode onlyIndustrial / Dust ResistanceAttached MEDIUM ASCII PROTOCOLCommunication via RS 4852 mm Front Lexan Polycarbonate SheetClamp : Wall mounting

Details:

• The Messages can be updated from a PC periodically.
• Simple to use PC software
• SEND YOUR MESSAGE IN ANY LANGUAGE
• The hardware can be built to any specification, from ruggedness to Water and
• Tamper resistance etc like IP65.
• The Boards can be driven using RS422 / RS485 or Ethernet / Wifi.
• The units can also be controlled remotely using a GPRS/3G Data Terminal Unit.
• We offer Red, Red+Green or Full Color boards.
• Our soultion also includes the software for driving the boards with minimal humanintervention. The software is written to be easy and intutive to use.

The Weigh Bridge Display is an easy to read LED remote displays. Available with a choice of 140,260,400,560mm digits the high intensity, red LED characters can be seen from up to 325 feet and with a filtered lens are clearly visible both indoors and outside. These easy to read displays mean that operators do not need to walk around a site checking readouts. When integrated to a weighbridge, for example, there is no reason for a driver to leave the safety of his or her cab. The remote displays use auto-learn technology to make installation quick and easy. This can interpret the communication format and data stream of almost any instrument automatically to reduce set up time. There is usually no need to press buttons or set switches to configure the LED display with its plug and play capability. It can be integrated to virtually any weighing equipment and can be used for a huge range of applications.

Other Details:

• LED boards can be controlled via RS232 / RS485
• Optional – we can supply LED boards along with Protocol document – This can be directly interfaced with your data device
• We can support ASCII Protocol by default. MODBUS and other protocols on request.
• LAN boards can also be supplied – Optional

Additional Information:

• Delivery Time: 2 weeks

We are quality oriented firm that strive towards offering high quality Bank Interest Rate Boards in plethora of sizes, colors and shapes. Offered boards are used in banks to display real time and bank interest rate. Owing to their clear display and low power consumption, these boards are widely cherished among clients. Use simple TV type remote to edit/enter the numbers.

Specifications:

• Digit height is about 1” and readable upto 25 feet indoors

Additional Information:

• Delivery Time: delivery within 1 week

We are reckoned manufacturer and supplier of premium grade Ticker Display boards that are incorporated with advance software used for operating with minimal human intervention. The software has built in module that allows proper display of advertisements on the boards. Installed in buses, these boards display exact bus number, destination and other important information on it. We offer the range at the most competitive prices meeting customer’s need.

Features:

• Easy to operate
• Clarity
• Durable

Additional Information:

• Production Capacity: chennai
• Delivery Time: 1-2 weeks

Digital Input Scanner - The Digital Input Scanner keeps track on input status. The user can program the alarm condition to be alarm when contact open or alarm when contact closed or in change of status. The message can also be programmed as required.

Features:

• Easily readable from distance
• Easy installation
• No maintenance required
• Weather proof

Specifications:

Digit sizes : (digit height):

• 140 mm
• 260 mm
• 400 mm
• 560 mm

Additional Information:

• Production Capacity: chennai
• Delivery Time: delivery within 1-2 weks

As a prominent manufacturer and supplier of the industry, we are involved in manufacturing and supplying a wide range of Display Systems and Display Boards. Offered products are demanded highly for their performance and minimal maintenance.

LED Protocol Display Board.Single SidedRed High BrightDigit Size : 140 mmCabinet Size : 250 mm (H) X 1370 mm(W) X 90 mm(D)Model No : 14Communication via RS 485ATTACHED MEDIUM PROTOCOL DATASHEETIndustrial / Dust resistanceFor Static Mode means you can Display only 16 Characters ( Alpha numeric )For Moving Means you can display More than 16 Characters ( Alpha Numeric)2 mm front Lexan polycarbonate sheetOperating Voltage: 230V ACClamp : Wall Mounting (Concel Clamp)

Modbus Slave LED board allows PLCs andother automation equipment to display integerand floating point values over ModBus. The LEDBoard acts like a slave on the RS485 Bus. Thebaud rate and the slave ID can be set usingprovided ASCII protocol. Writing to the Integerregister will display a Integer Value. Writing tothe floating point register will display a floatingpoint Value. This way you can display any typeof data on the LED Board.Please contact our sales for details aboutModbus Master Boards(Modbus TCP usesEthernet). .

Other Details:

• LED boards can be controlled via RS232 or RS485 -Serial interface
• Optional – we can supply LED boards along with Protocol document – This can be directly interfaced with your data device
• We can support ASCII Protocol by default. MODBUS and other protocols on request
• LAN boards can also be supplied – Optional
• Each board supplied with 5 meters Communication cable
• LAN boards are not supplied with any cable – you may connect it to your nearest LAN Port
• Install PC software. Use PC software to send data to the LED board
• Displays in Any language. (subject to availability of fonts in your PC)
• Connect multiple displays from one PC
• LED boards works on 230V AC mains ( 110V clocks can be quoted for separately)
• LED boards display in Single colour. The Default supply is always in RED colour. Other colours on request at extra cost
• RED colour Brightness is good for viewing both indoors and outdoors
• Mounting provision – option #1 – Top eye bolts – you can hang it from ceiling. Option # 2 – Side clamps – you can bolt it to your supports

In our offered range also includes Bank Interest Rate Display that can display customized messages in any language with a digital clock. In these display boards there is option of both single color and multi color display. Our professionals make use of premium quality raw material sourced from known vendors of the market in fabricating these display boards. We have been able to bring forth the customized range of products.

Features:

• High material strength
• Accurate results
• High brightness  

Additional Information:

• Delivery Time: 1-2 weeks

Counting the revolutions per minute (RPM) of motors determining the motor speed is essential in the field of industrial automation. It is useful especially for closed-loop control systems where proper action can be taken in case the actual RPM deviates from the set RPM.

Features:

• Easily readable from distance
• Easy installation
• No maintenance required
• Weather proof

Digit sizes : (digit height):

• 140 mm
• 260 mm
• 400 mm
• 560 mm

Additional Information:

• Delivery Time: 1-2 weeks

Details:

• LED Matrix can display any Custom Message in any language
• Multiple Custom Messages can be displayed in any language.
• Single or Multi colour messages
• The Messages can be updated from a PC.
• Simple to use PC software
• Shatter resistance and weather protection IP65 equivalent for Industrial casing.
• Economy low cost casing also available
• The Boards can be connected via RS232 / RS485 / TCP-IP / Isolated contacts.

Additional Information:

• Delivery Time: 1 - 2 weeks

Other Details:

• Up to the minute production information
• Actual production figures
• Comparisons against a target or a previous period
• Results for the business as a whole
• Units produced per minute, hour, day, machine, team or person at regular intervals
• Production status
• Alert you to any production problems, for example, monitoring reject rates and comparing them to target or previous actuals
• Record any stoppages on a production line, perhaps in a hidden page that you call up later for interrogation
• Show the status of your jobs in real time
• Safety status or a state of alert
• Remotely interrogate information stored in the display's memory

Additional Information:

• Delivery Time: 2 weeks

Mod bus Slave LED board allows PLCs and other automation equipment to display integer and floating point values over Mod Bus. The LED Board acts like a slave on the RS485 Bus. The baud rate and the slave ID can be set using provided ASCII protocol. Writing to the Integer register will display a Integer Value. Writing to the floating point register will display a floating point Value. This way you can display any typeof data on the LED Board. 
PRODUCT FEATURES : 

 Inputs – Mod bus RS485 Interface .
 Mod Bus Slave Mode - PLC Writes to the Display.
 Two 16 Bit Registers , One for Integer Display One for Floating Point .
 Setup  RS485  as per our ASCII protocol. Enables data written from a PC/PLCs to be displayed in real-time in a formatted message All units work off 230V AC mains ( 110V can be quoted for separately) 

Additional Information:

• Item Code: 050
• Production Capacity: 15
• Delivery Time: 1 WEEK
• Packaging Details: This is a waterproof and roadworthy packing and the best for the board with thermocole, bubble sheets, edge protector, stretch wrap and plywood casing

BOARD TECHNICAL SPECIFICATION : ( Without Front Lexan Sheet)LED OIL RATE DISPLAY BOARDSize of the display will be : 370 mm(H) X 980 mm(W) X 50mm(D)Display Area Sixe will be : 320 mm(H) X 800 mm(W) X 50 mm(D)White Colour LED (Model No. 23)you can use your android phone and update the rates via an appwe will supply the two cabinets separately and you can fix on the displayThe board acts as a hotspot and you can connect your android phone to theLED board and edit the rate.You can install the display at inside of the totem onlyWithout Front Lexan SheetSingle sidedClamp : Flange clamp23 modelQty - 2 setsPer set contains 2 boards

TECHNICAL SPECIFICATION :Led Industrial Display BoardSingle SidedModel FOS-13Red high brightCabinet size 250mm (H) X 1050mm wide X 90 mm (D)Two lines displayTop line 70 mm high - 15 characters maximum including spacesline 70 mm high - 15 characters maximum including spacesEdit from PC using our simple software.The software will send the truck number to the LED boardWITH MANUAL ENTRY & WITHOUT AUDIO FEATURECommunicatin via LanClamp : TOP Hanging “EYE Hook”

LED Industrial Moving Display Board.Red High BrightDouble SidedOutdoor ( You need to place the board under shade)Model No : 22Cabinet Size : 470 mm (H) X 740 mm(W) X 100 mm(D)Digit Size : 140 mmCommunication via WIFIIndustrial / Dust ResistanceClamp : Flange TypeQty - 2 Nos.

TECHNICAL SPECo Led display boardo Pixel P10o Single Colour - Redo Model – Econ - 11o Size of each board 160mm high x 320mm wideo Single sided displayo RED high brighto 70mm high characterso Mount indoors onlyo Board 1 to be connected to Board 2 with our 10 meter cable Edit Board 1 with hand held remote – the content will appear in Board 2 Both boards work off 230V AC mains Cabinet Made with MS powder coated Fixing clamp will be provided with the board Warranty 1 year from the date of billing

LED Industrial Display BoardSingle SidedHeight of digit 140mmGREEN high brightSize of cabinet 1220mm wide x 730mm highTitles with printed substrateMount the board under a canopy for long lifeBoard works off 230v AC mainsCommunication RS485 MODBUS RTUYou have to provide register address of your device details and the board will pick up dataThe third value - CO2 savings value will be derived from the second value multiplied by 0.9(multiplication factor)Clamp : Wall Mounting Consel Clamps

TECHNICAL SPECIFICATION :LED ECON PRE-DEFINED MODBUS DISPLAY BOARDRed High BrightSingle SidedScrolling typeModel No : FOS - ECON – 13Cabinet Size : 160 mm(H) X 960 mm(W) X 60 mm(D)20 – Predefined messagesCommunication via MODBUS Slave –TCP/IPClamp : "L" + Conceal Clamp

TECHNICAL SPEC :

LED ECON MODBUS SLAVE DISPLAY BOARDRED high bright /140mm digit High/Single SidedModel No : ECON-0101Size of cabinet 160mm high x 320mm wide x 100 mm depthBoard works off 230V AC mains4 digits max as Static ModeFormat Like ( XX.XX)Communication via MODBUS RTU RS 485Please see link here with images of similar displays -Clamp : Low Cost board ClampQty - 6 No's.MODBUS DETAILS :Modbus register address start at 40001Floating typeBaud rate: 9600 bpsParity: NoneData length: 8Stop bit: 1

Additional Information:

• Delivery Time: 1-2 weeks

LED INDUSTRIAL PROTOCOL DISPLAY BOARDSingle sided displayRED high brightCabinet size - 520mm high x 1100 mm wide x 90mm deep230V AC mainsATTACHED MEDIUM ASCII Protocol DATASHEETTitles with stickerCommunication via TCP/IPsize of digit is 140mm highIndustrial / Dust ResistanceClamp : Wall Mounting

Additional Information:

• Delivery Time: 1-2 weeks

TECHNICAL SPEC : Model No : FOS- 66LED Industrial Display boardRed high brightOutdoor ( You Need to place the board Under Shade)Industrial IP 65Pixel Pitch : 10mmSingle sided2 mm Front Lexan Polycarbonate SheetCabinet size : 1050mm (H) X 2010mm(W) X 90mm(D)Digit size : 140 mmModel No : FOS- 66Viewing distance : 100 mtrsPower supply : 230V ACCommunication via LAN (Pickup data from .TXT file over LAN)Clamp : Flange Type

Additional Information:

• Delivery Time: 1-2 weeks

TECHNICAL SPEC• LED Industrial Display Board• Single Sided• Height of digit 140mm• GREEN high bright• Size of cabinet 1370mm wide x 730mm high• Titles with printed substrate• Wall mounting• Mount the board under a canopy for long life• Board works off 230v AC mains• Communication RS485 MODBUS RTU• You have to provide register address of your device details and the board will pick updata• The third value - CO2 will be derived from the second value multiplied by 0.9 (pleaseconfirm this)• Fixing

1. LED boards can be controlled via RS232 or RS485 -Serial interface2. Optional – we can supply LED boards along with Protocol document – This can be directly interfaced withyour data device. We can support ASCII Protocol by default. MODBUS and other protocols on request.3. LAN boards can also be supplied – Optional4. Each board supplied with 5 meters Communication cable5. LAN boards are not supplied with any cable – you may connect it to your nearest LAN Port.6. Install PC software. Use PC software to send data to the LED board.7. Displays in Any language. (subject to availability of fonts in your PC)8. Connect multiple displays from one PC9. LED boards works on 230V AC mains ( 110V clocks can be quoted for separately)10. LED boards display in Single colour. The Default supply is always in RED colour. Other colours on request atextra cost.11. RED colour Brightness is good for viewing both indoors and outdoors.12. For outdoor displays – cost increases by 18% on base price.13. Mounting provision – option #1 – Top eye bolts – you can hang it from ceiling. Option # 2 – Side clamps –you can bolt it to your supports.

TECHNICAL SPEC.LED ECON TRUCK LINE NUMBER DISPLAY BOARDSingle SidedRed High BrightPixel – 10 mmModel No : FOS-ECON-0201Digit High : 290 mm (or) 300 mmCabinet Size : 320mm(H) X 320 mm(W) X 60 mm(D)In-builded , Edit through USBBoard can Display only Standard Loaded Messages onlyClamp : Usual Econ Board Clamp

TECHNICAL SPEC.• LED ECON Display board• Model-ECON-12• Pixel - P10 RGB• Size of cabinet: 160mm high x 640mm wide x 60mm deep approx.• Indoor• single sided display• Single line data• Boards work off 230v AC mains• Digit size : 140mm high characters• communication : The displays to be connected to your LAN• You can send as TCP/IP MODBUS• Power cable 2.5 mtrs Provided with LED Board• Fixing clamp and software provided with LED Board

TECHNICAL SPEC :Size of cabinet 350mm high x 740 mm wideSingle sided display70mm high digitsRED high bright matrix displayRS485 input via Medium ProtocolFixing Side “L” Clamp (Wall Mounting)

TECHNICAL SPECIFICATION :Led Production Display BoardDATE & TIME Window is 2" FND redRest all 4" FND red/Single Sided DisplayTARGET - Will increment based on cycle time. This will start incrementing from beginof each shiftACTUAL - will increment once per potential free contact across terminal - you shouldnot provide voltageDIFF - As Per formulaEFFY% - As Per formula ( It should be 3 digits only)Cycle time sdhould be more than10 secondsDAILY PLAN - Edit/set via Remote ManuallyDAILY ACTUAL - will increment once per potential free contact across terminal - youshould not provide voltageTitles by Vinyl StickerClamp : TOP Hanging

Technical Specification:
Led Power Status Indicator Display Board
Changeover Indicator
230MM character HighDG in RED and EB in Green
Switching through Latch contacts

Technical Specification:
Led Power Status Indicator Display Board
140MM high EB/DG
Cabinet size : 15" (H) * 18" (W)
Two colour board - Red & Green(EB/DG)
For showing EB/DG - Latch contacts
Double sided display 

Led Church information displaySingle sided/Red High Bright matrix displayPixel - 10 mm/RED/IndoorTotally Six WindowsTitle: computer cut vinylDust Resistant cabinetDigit Size: 140 mmCabinet size: 48" (H) X 24" mm(W)Data Entry via Remote ControlClamp: Wall Mounting

Size of the display will be: 230 mm(H) X 710 mm(W) X 40mm(D)RED high bright matrixModel No: 12You can use your android phone and update the rates via an appOne set is two cabinets and user can fix separately as front and rear on totem poleThe board acts as a hotspot and you can connect your android phone to the LED board and edit the rate.Single sided

As a prominent manufacturer and supplier of the industry, we are involved in manufacturing and supplying a wide range of Display Systems and Display Boards. Offered products are demanded highly for their performance and minimal maintenance.

As a prominent manufacturer and supplier of the industry, we are involved in manufacturing and supplying a wide range of Display Systems and Display Boards. Offered products are demanded highly for their performance and minimal maintenance.

As a prominent manufacturer and supplier of the industry, we are involved in manufacturing and supplying a wide range of Display Systems and Display Boards. Offered products are demanded highly for their performance and minimal maintenance.

Other Details:

• Up to the minute production information
• Actual production figures
• Comparisons against a target or a previous period
• Results for the business as a whole
• Units produced per minute, hour, day, machine, team or person at regular intervals
• Production status
• Alert you to any production problems, for example, monitoring reject rates and comparing them to target or previous actuals
• Record any stoppages on a production line, perhaps in a hidden page that you call up later for interrogation
• Show the status of your jobs in real time
• Safety status or a state of alert
• Remotely interrogate information stored in the display's memory

Leveraging on our sound infrastructure and team of skilled professionals, we have been able to come forth with a superior grade range of Digital Clock. Our offered range is manufactured using quality assured raw material and suited for both indoor and outdoor viewing. Based on real time clock operations, these clocks provide with accurate results. Moreover, the clocks are also resistant to drifts that are caused due to variations in temperature.

Features:

• Housing and mounting arrangement
• Low power consumption
• Battery backup

Additional Information:

• Delivery Time: 1-2 weeks