Kamal And Co.

Other Details:

• Up to the minute production information
• Actual production figures
• Comparisons against a target or a previous period
• Results for the business as a whole
• Units produced per minute, hour, day, machine, team or person at regular intervals
• Production status
• Alert you to any production problems, for example, monitoring reject rates and comparing them to target or previous actuals
• Record any stoppages on a production line, perhaps in a hidden page that you call up later for interrogation
• Show the status of your jobs in real time
• Safety status or a state of alert
• Remotely interrogate information stored in the display's memory

LED Industrial Moving Display Board.Red High BrightDouble SidedOutdoor ( You need to place the board under shade)Model No : 22Cabinet Size : 470 mm (H) X 740 mm(W) X 100 mm(D)Digit Size : 140 mmCommunication via WIFIIndustrial / Dust ResistanceClamp : Flange TypeQty - 2 Nos.

Counting the revolutions per minute (RPM) of motors determining the motor speed is essential in the field of industrial automation. It is useful especially for closed-loop control systems where proper action can be taken in case the actual RPM deviates from the set RPM.

Features:

• Easily readable from distance
• Easy installation
• No maintenance required
• Weather proof

Digit sizes : (digit height):

• 140 mm
• 260 mm
• 400 mm
• 560 mm

TECHNICAL SPEC : Patient Calling Led Display Board GREEN color high bright display Pixel - 10 mm / Single Sided Model No : FOS 13 Digit Size : 140 mm Display Area : 160mm (H) X 960 mm(W) Size of cabinet: - H 10” x W – 48” X 90 mm(D) LAN Communication ( Manual entry) Connect Board to LAN and assign IP Now send the number from any PC using a Web Browser The board will now tell “CALLING PATIENT BED 57” Just login G-Box and send patient no. Board works off: 230V 50Hz AC mains. Clamp : TOP Hanging

TECHNICAL SPECIFICATION :LED ECON PRE-DEFINED MODBUS DISPLAY BOARDRed High BrightSingle SidedScrolling typeModel No : FOS - ECON – 13Cabinet Size : 160 mm(H) X 960 mm(W) X 60 mm(D)20 – Predefined messagesCommunication via MODBUS Slave –TCP/IPClamp : "L" + Conceal Clamp

LED MODBUS Slave Display BoardRed High BrightSingle SidedModel No : 13Digit Size : 140 mmCabinet Size : 250 mm(H) x 1050 mm(W) X 90 mm(D)Maximum you can display 12 Digits as Static Mode Only ( Alpha-Numeric Values Only)Industrial / Dust ResistanceCommunication via MODBUS TCP/IP2 mm Front Lexan Polycarbonate SheetClamp : Wall Mounting

TECHNICAL SPEC :Size of cabinet 350mm high x 740 mm wideSingle sided display70mm high digitsRED high bright matrix displayRS485 input via Medium ProtocolFixing Side “L” Clamp (Wall Mounting)

1. LED boards can be controlled via RS232 or RS485 -Serial interface2. Optional – we can supply LED boards along with Protocol document – This can be directly interfaced withyour data device. We can support ASCII Protocol by default. MODBUS and other protocols on request.3. LAN boards can also be supplied – Optional4. Each board supplied with 5 meters Communication cable5. LAN boards are not supplied with any cable – you may connect it to your nearest LAN Port.6. Install PC software. Use PC software to send data to the LED board.7. Displays in Any language. (subject to availability of fonts in your PC)8. Connect multiple displays from one PC9. LED boards works on 230V AC mains ( 110V clocks can be quoted for separately)10. LED boards display in Single colour. The Default supply is always in RED colour. Other colours on request atextra cost.11. RED colour Brightness is good for viewing both indoors and outdoors.12. For outdoor displays – cost increases by 18% on base price.13. Mounting provision – option #1 – Top eye bolts – you can hang it from ceiling. Option # 2 – Side clamps –you can bolt it to your supports.

TECHNICAL SPECIFICATION :

LED INDUSTRIAL COUNTER DISPLAYSingle SidedRed High Bright – Dot MatrixDigit Size : 70 mm HighSize of Cabinet : 410 mm(H) X 510 mm (W) X 90 mm(D) Approx.Title by Vinyl StickerLatch C1,C2,C3 for increase Count in Minutes – CumulativePulse C4 for Reset of all three CountersIndustrial /Dust ResistanceClamp - "L" Clamp

Size of board - H 640mm high x 1050mm wide x 100mm deep approx Double Sided Display For Counter: is incremented once for each potential free contact Previous C/T: This is the cycle time of the Previous Actual Current C/T: This is the cycle time of the Current Actual Clock: This displays the Real time clock Reset of count / clock; through PF Contact Count and Previous C/T Two Window Red Clock - Yellow, Current C/T - Green Titles with Computer Cut Vinyls Top hanging hooks provided for your hanging Size of Digits - 140mm

Technical Specification• LED Industrial ADC Display Board• Model : FOS-ADC-11• For One parameter• Red High Bright• Single sided/Digit size - 140mm• Cabinet Size - 450mm (H) X 350mm (W) x 90mm (D)• Communication – 4-20mA input• Industrial / Dust Resistance• Titles by vinyl sticker• 2 mm Front Lexan Polycarbonate Sheet• Input Power Supply : 110 V AC• Clamp Will be Provided Cunseal Clamp

TECHNICAL SPECo Led display boardo Pixel P10o Single Colour - Redo Model – Econ - 11o Size of each board 160mm high x 320mm wideo Single sided displayo RED high brighto 70mm high characterso Mount indoors onlyo Board 1 to be connected to Board 2 with our 10 meter cable Edit Board 1 with hand held remote – the content will appear in Board 2 Both boards work off 230V AC mains Cabinet Made with MS powder coated Fixing clamp will be provided with the board Warranty 1 year from the date of billing

TECHNICAL SPEC.LED ECON TRUCK LINE NUMBER DISPLAY BOARDSingle SidedRed High BrightPixel – 10 mmModel No : FOS-ECON-0201Digit High : 290 mm (or) 300 mmCabinet Size : 320mm(H) X 320 mm(W) X 60 mm(D)In-builded , Edit through USBBoard can Display only Standard Loaded Messages onlyClamp : Usual Econ Board Clamp

TECHNICAL SPEC.• LED ECON Display board• Model-ECON-12• Pixel - P10 RGB• Size of cabinet: 160mm high x 640mm wide x 60mm deep approx.• Indoor• single sided display• Single line data• Boards work off 230v AC mains• Digit size : 140mm high characters• communication : The displays to be connected to your LAN• You can send as TCP/IP MODBUS• Power cable 2.5 mtrs Provided with LED Board• Fixing clamp and software provided with LED Board

Mod bus Slave LED board allows PLCs and other automation equipment to display integer and floating point values over Mod Bus. The LED Board acts like a slave on the RS485 Bus. The baud rate and the slave ID can be set using provided ASCII protocol. Writing to the Integer register will display a Integer Value. Writing to the floating point register will display a floating point Value. This way you can display any typeof data on the LED Board. 
PRODUCT FEATURES : 

 Inputs – Mod bus RS485 Interface .
 Mod Bus Slave Mode - PLC Writes to the Display.
 Two 16 Bit Registers , One for Integer Display One for Floating Point .
 Setup  RS485  as per our ASCII protocol. Enables data written from a PC/PLCs to be displayed in real-time in a formatted message All units work off 230V AC mains ( 110V can be quoted for separately) 

Modbus Slave LED board allows PLCs andother automation equipment to display integerand floating point values over ModBus. The LEDBoard acts like a slave on the RS485 Bus. Thebaud rate and the slave ID can be set usingprovided ASCII protocol. Writing to the Integerregister will display a Integer Value. Writing tothe floating point register will display a floatingpoint Value. This way you can display any typeof data on the LED Board.Please contact our sales for details aboutModbus Master Boards(Modbus TCP usesEthernet). .

Red High BrightSingle SidedOutdoorModel No 23Cabinet Size : 410 mm(H) x 1050 mm(W) X 90 mm(D)Totally you can Display Two Lines ( Alpha & Numeric)TOP Line : 12 Characters ( 140 mm Digit High) as Static Mode onlyBottom Line : 12 Characters ( 140 mm Digit High) as Static Mode onlyIndustrial / Dust ResistanceAttached MEDIUM ASCII PROTOCOLCommunication via RS 4852 mm Front Lexan Polycarbonate SheetClamp : Wall mounting

LED Protocol Display Board.Single SidedRed High BrightDigit Size : 140 mmCabinet Size : 250 mm (H) X 1370 mm(W) X 90 mm(D)Model No : 14Communication via RS 485ATTACHED MEDIUM PROTOCOL DATASHEETIndustrial / Dust resistanceFor Static Mode means you can Display only 16 Characters ( Alpha numeric )For Moving Means you can display More than 16 Characters ( Alpha Numeric)2 mm front Lexan polycarbonate sheetOperating Voltage: 230V ACClamp : Wall Mounting (Concel Clamp)

LED Industrial Display BoardSingle SidedHeight of digit 140mmGREEN high brightSize of cabinet 1220mm wide x 730mm highTitles with printed substrateMount the board under a canopy for long lifeBoard works off 230v AC mainsCommunication RS485 MODBUS RTUYou have to provide register address of your device details and the board will pick up dataThe third value - CO2 savings value will be derived from the second value multiplied by 0.9(multiplication factor)Clamp : Wall Mounting Consel Clamps

LED INDUSTRIAL PROTOCOL DISPLAY BOARDSingle sided displayRED high brightCabinet size - 520mm high x 1100 mm wide x 90mm deep230V AC mainsATTACHED MEDIUM ASCII Protocol DATASHEETTitles with stickerCommunication via TCP/IPsize of digit is 140mm highIndustrial / Dust ResistanceClamp : Wall Mounting

Technical Specification:
Led Power Status Indicator Display Board
Changeover Indicator
230MM character HighDG in RED and EB in Green
Switching through Latch contacts

Technical Specification:
Led Power Status Indicator Display Board
140MM high EB/DG
Cabinet size : 15" (H) * 18" (W)
Two colour board - Red & Green(EB/DG)
For showing EB/DG - Latch contacts
Double sided display 

Other Details:

• Up to the minute production information
• Actual production figures
• Comparisons against a target or a previous period
• Results for the business as a whole
• Units produced per minute, hour, day, machine, team or person at regular intervals
• Production status
• Alert you to any production problems, for example, monitoring reject rates and comparing them to target or previous actuals
• Record any stoppages on a production line, perhaps in a hidden page that you call up later for interrogation
• Show the status of your jobs in real time
• Safety status or a state of alert
• Remotely interrogate information stored in the display's memory

As a prominent manufacturer and supplier of the industry, we are involved in manufacturing and supplying a wide range of Display Systems and Display Boards. Offered products are demanded highly for their performance and minimal maintenance.

Other Details:

• LED boards can be controlled via RS232 or RS485 -Serial interface
• Optional – we can supply LED boards along with Protocol document – This can be directly interfaced with your data device
• We can support ASCII Protocol by default. MODBUS and other protocols on request
• LAN boards can also be supplied – Optional
• Each board supplied with 5 meters Communication cable
• LAN boards are not supplied with any cable – you may connect it to your nearest LAN Port
• Install PC software. Use PC software to send data to the LED board
• Displays in Any language. (subject to availability of fonts in your PC)
• Connect multiple displays from one PC
• LED boards works on 230V AC mains ( 110V clocks can be quoted for separately)
• LED boards display in Single colour. The Default supply is always in RED colour. Other colours on request at extra cost
• RED colour Brightness is good for viewing both indoors and outdoors
• Mounting provision – option #1 – Top eye bolts – you can hang it from ceiling. Option # 2 – Side clamps – you can bolt it to your supports

We make People Counter with Totaliser / Totalizer which has Additional feature to batch counters to give total people movement. Optional Feature – Enables the unit to know the rate of people movement at any given instance of time. In shows and events many times a batch contains a certain number of people / visitors / tourists. Batch counters will automatically generate a relay output when a preset number of counts have reached and number of such batches are also counted and stored in counter memory.

Features:

• Easily readable from distance
• Easy installation
• No maintenance required
• Weather proof